Πλαίσιο κειμένου: ΝΕΑ ΙΣΤΟΣΕΛΙΔΑ / NEW WEBSITE :   www.selenlab.grΠλαίσιο κειμένου: ΕλληνικάΠλαίσιο κειμένου: ΣΥΓΚΕΝΤΡΩΤΙΚΟΣ ΚΑΤΑΛΟΓΟΣ ΠΡΟΪΟΝΤΩΝ

 

 

Stands

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BURNER BUNSEN - C88 (G)
Nickel plated burner tube of brass 12 mm diameter with air regulator adjustable and a cylindrical riffled connector, mounted on an painted metal base. Suitable for Natural gas and fitted with gas control stopcock. Brass tube 100x12mm height x diameter. Base 10 mm diameter. Overall height 145 mm.

BURNER BUNSEN - C94 (H)
Nickel plated burner tube of brass fitted with deep ceramic grid 22 mm diameter to give a high and evenly distributed flame temperature. Painted metal base.

 

 

 

 

 

 


 

 

 

 

STAND TRIPOD, CIRCULAR - C 644 (F)
Cast iron top and mild steel legs. Finished in hammer / black color and legs are bent outward for stability.

 

A

B

Height (cm)

20

20

Diameter (cm)

12,5

15

 

 


 

 

STAND TRIPOD, TRIANGULAR - C 645 (G)
Cast iron top and mild steel legs. Finished in hammer / black color and legs are bent outward for stability.

 

A

B

Height (cm)

20

20

Length of Side (cm)

12,5

15

STAND TRIPOD, TRIANGULAR - C 646 (H)
Top triangular, all steel welded, finished in hammer / black color and legs are bent outward for stability. Length of one side is 12,5 cm and height 20 cm.

 

 

 

 

 

 


 

 

RETORT STAND BASE, RECTANGULAR - C 650 (A)
Complete with rod, cast iron base, painted in blue/black color and with hole. Iron rod 12,5 mm diameter nickel plated. One end of rod is rounded and the other end is machine threaded with washer and hexagonal nut.

 

A

B

C

D

Base size (cm)

16x10

20x12,5

25x15

31,5x20

Rod length (cm)

50

60

75

100

Base Wt. (approx.) (kg)

0,75

1,25

2,0

3,0

 

 

 

 

 

 


 

 

 

 

 

RETORT STAND BASE, RECTANGULAR - C 651 (B)
Complete with rod and cast iron base as shown, painted in blue/black color and complete with hole. Shape enables like sizes to be nested. Iron rod 13 mm diameter nickel plated. Length given is that between the feet of the base.

 

A

B

Base size (cm)

18

23

Rod length (cm)

60

75

 

 


 

 

LABORATORY STAND MALVERN - C 651A (C)

Stable tripod base accepts rods to 3-13 mm diameter. Each foot is drilled with 4 mm hole for earthling during electric experiments. Base and rod supplied separately. 13,5 cm spread from center, height 40 mm and mass 2 kg approx. IA. As above, but small size 8,5 cm spread form center, height 40 mm and mass 1,25 kg approx.

 

 

 

 

 

 

 


 

 

 

 

RETORT STAND BASE, RECTANGULAR - C 652 (D)
Complete with rod, base made of mild steel plate with hammer finish and hole. Iron rod 12,5 mm diameter nickel plated provided with locked pin for extra tightening of rod. Base fitted with leveling screw and feet.

 

A

B

C

D

E

Base size (cm)

20x12,5

22,5x15

22,5x15

30x20

30x20

Rod length (cm)

60

60

75

75

90

 

 


 

 

CHANNEL BASE -
C 653
(E)

Slotted base, casted alloy with mat finish, accepts flat objects up to 13 mm thickness. Dimensions 10,5x8,5 cm approx.

 

 

RETORT STAND BASE - C 653A (F)
Rectangular pressed steel with mat black finish, hole is located centrally on the length.

 

A

B

Base size (cm)

15x10

20x13

Rod length (cm)

60

60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

 

BOSS HEAD - C 656 (G)

For laboratory stand, for use in school and colleges, die-pressed of mild steel strip, chrome plated, accepts rod up to 18 mm diameter and clamp rod up to 7.5 mm diameter which are secured with nickel plated thumb screws.

 

 

BOSS HEAD - C 660 (I)

For laboratory stand, for use in school and colleges, diecasted alloy, accepts rods up to 16,5 mm diameter at right angle to each other which are secured with nickel plated brass tommy screws.

 

 

 

 

 


 

 

BOSS HEAD - C 658 (H)

For laboratory stand, for use in school and colleges, diecasted alloy, accepts rod up to 16 mm diameter which are secured with nickel plated brass tommy screws.

 

 

BOSS HEAD - C 662 (J)

Diecasted alloy, accepts square and tubular sections up to 16,5 mm diameter at right angle to each other. Will also hold flat articles such as rules, magnets, drawing board etc.

 

 

 

 

 

 

 


 

 

RETORT RING - C 664 (K)
Rings with plain stem 8 mm diameter with welded joints for greater strength.

 

A

B

C

Diameter inside (cm)

5,5

7,5

10

 

PLATE ON STEM - C 666 The plate is 10cm diameter in steel with 8mm x 135mm plain stem, finished in grey hammered stoved enamel paint.

 

 

 

 

 

 


 

 

 

 

RING RETORT STAND - C 670 (A)
Malleable iron, ring and arm of strong circular section, with open boss fitted with thumb screw to clamp on stands. Distance between center of ring and supporting rod is 12 cm. Fits rods up to 13 mm.

 

A

B

Diameter inside (cm)

5,5

7,5

SPOON SODIUM - C 672
For holding sodium under water. Comprising rust proof wire stem and strong cage to safely enclose the sodium. Gauge cage is 20 mm diameter and overall length 25 cm.

 

 


 

 

CLAMP UNIVERSAL - C 678 (B)
Made of sheet metal and chrome plated, spring controlled jaws cork lined which can accept 12 to 50 mm diameter articles, with brass wing nut, fitted with 15 cm long mild steel rod.

CLAMP RETORT - C 682 (C)
Two Prong, comprised alloy pressure diecasting with other parts of plated brass, clamp accepts articles form 15 - 60 mm diameter actuated by nickel plated brass pummels and twin screw, the jaws are cork lined. Fitted with 15 cm long mild steel or aluminium rod.

 

 

 

 

 

 


 

 

 

 

CLAMP RETORT - C 684 (D)

Diecast in alloy, with other parts of plated brass, clamp accepts articles from 2 - 90 mm diameter, actuated by nickel plated brass pummels and twin screw. The design of the jaw ensures a firm grip at all angles of opening. The cork liners for the jaws are well secured. Fitted with 15 cm long mild steel or aluminium rod.

 

 


 

 

CLAMP RETORT - C 686 (E)

Three Prong, diecast in alloy, with other parts of plated brass, clamp accepts articles up to 75 mm diameter, actuated by nickel plated brass pummels and twin screw. Jaws are covered in rubber. Fitted with 15 cm long mild steel or aluminium rod.

 

 

 

 

 

 


 

 

 

 

CLAMP COMBINED - C687 (F)
Diecast in aluminium alloy moulded clamp, spring controlled cork lined or rubber covered jaws with aluminium alloy boss head. Boss head accommodates rods up to 15 mm and can rotate with the help of wing nut.

A

Three finger clamps

B

Universal clamps

 

CLAMP CONDENSER - C 687 A
D iecast in aluminium alloy, 3 finger jaws adjusted by two independent screws fitted with 28 cm long mild steel rod of 10 mm diameter.

CLAMP CO-AXIAL - C 687 D (I)
Diecast in aluminium alloy, jaws adjustable by co-axial brass nut, holds from 18-75 mm diameter fitted with 28 cm long mild steel rod of 10 mm diameter.

 

 


 

 

CLAMP JUMBO - C 687 B (G)
Diecast in aluminium alloy, jaws are rubber sleeved hold from 60 - 130 mm diameter fitted with 28 cm long mild steel rod of 10 mm diameter.

CLAMP CO-AXIAL - C 687 C (H)
Diecast in aluminium alloy, jaws are fitted with asbestos sleeves, spring controlled adjustable by co-axial brass nut, holds up to 75 mm diameter fitted with 28 cm long mild steel rod of 10 mm diameter.

 

 

 

 

 

 


 

 

 

 

FUNNEL STAND - C 688 (J)
Made of seasoned hardwood, polished, with clamping screw. Rods are approx. 460x16mm. Single base 200x110mm. Double base 290x110mm approx.

A

Single

B

Double

 

 


 

 

 

 

LABORATORY GLASSWARE
100a, Acropoleos str. 184 51 Nikaia, Athens, Greece
Tel: +301 - 4917230, 4250584, Fax: +301 - 4904214