ATHENS 
MY WEATHER STATION, BY DIMITRIS
Location: Peristeri of Athens, Greece
Position: 38 00.58' NORTH / 23 42.04' EAST
Elevation: 63 meters
contact me at 

Wood stand with acrylic led
I made a wood stand with acrylic led

I cut two piece acrylic with jig saw,and i make oval the corners. The same I cut the woods for the stand of acrylic led with circular saw table.
Click here for large picture Click here for large picture Click here for large picture
With scroll saw i make a hole for i put inside the acrylic. I have put wood glue and With clams keep all woods With sander make the woods more smooth.
Click here for large picture Click here for large picture Click here for large picture
I painted a landscape at piece of paper,i put it over the acrylic,and for the other side with a rotary tool an engraving I passed the lines Is ready . Now with a small circular saw table i cut a piece of psb for i put there the 3 led (red-green-blue)
Click here for large picture Click here for large picture Click here for large picture
With soldering iron i make the led on pcb Is ready. Another view.
Click here for large picture Click here for large picture Click here for large picture
Another upstairs view. Puting down side anti bruit stickers. Is ready.
Click here for large picture Click here for large picture Click here for large picture
Is ready with turn off the lights. The same. I made another three acrylic led,i put baby oil at ply-wood.
Click here for large picture Click here for large picture Click here for large picture
Is ready with turn on the lights. Is ready with turn off the lights I made another two acrylic leds,with more small the wood base,and added a switch on-off in front place,and i do not use pcb but ply wood okoume 4 mm,and over there i stick the leds with glue gun.after with soldering iron i made the electronic connections between the leds
Click here for large picture Click here for large picture Click here for large picture
The same more close photos With a mini drill press i open holes for put screws,the wood corners it keep the acrylic. With a belt sander a make more smooth the open hole for switch on-off.
Click here for large picture Click here for large picture Click here for large picture
The up sides. Is ready Is ready with turn off the lights.
Click here for large picture Click here for large picture Click here for large picture
I make a transformer at a old version,i added at behind side two switch,one on-off-on,and one on-off master control,and i make it to work and with battery 9 volt and with DC 12 volt,i added in circuit one resistor yet. The front side I closed the down side with a 4 mm ply wood and 6 wood screws,and i put baby oil at ply-wood
Click here for large picture Click here for large picture Click here for large picture
Click here for you see a video
Click here for a demonstration video