ATHENS 
MY WEATHER STATION, BY DIMITRIS
Location: Peristeri of Athens, Greece
Position: 38 00.58' NORTH / 23 42.04' EAST
Elevation: 63 meters
contact me at 

Wood small Christmas tree
I made a Wood small Christmas tree

I cut two pieces of ply-wood 6 mm for Christmas tree,with circular saw table. I make a design at paper A4,and with glue stick it on the wood. I cut the woods with scroll saw.
Click here for large picture Click here for large picture Click here for large picture
I cut two pieces of 18 mm for two base for Christmas tree,with circular saw table. At two pieces of wood micro shaper with router bit,i make a small design at edge of wood. With a chisel i make a hole at wood,and with wood-glue i will stick the Christmas tree with base.
Click here for large picture Click here for large picture Click here for large picture
Is ready I paint the tree,green and white the enges (like snow) spay I paint the base-stand color Oregon.
Click here for large picture Click here for large picture Click here for large picture
I put down side anti bruit stickers Is ready Is ready.
Click here for large picture Click here for large picture Click here for large picture
I made another one,all of them. After little days i made another one 3D Christmas tree. Is ready with greeen and wight spray color.
Click here for large picture Click here for large picture Click here for large picture
Another one photo All of them
Click here for large picture Click here for large picture



Wood Christmas bauble stand
I made Wood Christmas bauble stand.The original concept and design is from Dm Idea.

I cut the woods with circular saw table. I found to internet a design from it,i make copy,and with glue stick it on the wood. I cut the woods with scroll saw.
Click here for large picture Click here for large picture Click here for large picture
The same. With disc sander i make the bauble more smooth,and more cycle. With belt sander i make more smooth the wood of stand.
Click here for large picture Click here for large picture Click here for large picture
With a multitool with coarse sanding make the slots more smooth,and after i put wood glue at base stand I paint it with spray. Is ready.
Click here for large picture Click here for large picture Click here for large picture
All of them.
Click here for large picture



Wood Christmas tree with led light
I made a wood Christmas tree with led light

I cut the wood with design Christmas tree with scroll saw. I cut the wood for base stand Christmas tree. i cut the small wood for base stand with a mitre saw.
Click here for large picture Click here for large picture Click here for large picture
With a chisel i make a hole at wood,and with wood-glue i will stick the Christmas tree with base. I have put wood glue and with clams keep all woods. I open 3 holes for led,and with sander make the woods more smooth.
Click here for large picture Click here for large picture Click here for large picture
With soldering iron i connect the 3 led high light at series connection,with a resistor 330 Ohm at 1/2 watt with battery 9 volt. I stick with warm silicone the led at wood,the cable at wood,and the battery base at wood. The same with battery base open
Click here for large picture Click here for large picture Click here for large picture
I put down side anti bruit stickers Is ready. Is ready turn on the led with bright room.
Click here for large picture Click here for large picture Click here for large picture
Is ready turn on the led at dark room. I made another one,and i put over there snow spray. Is ready two of them,turn on the led at dark room.
Click here for large picture Click here for large picture Click here for large picture