Replace RJ11 Telephone cable connector
All part La-crosse 2300 (anemometer,raing gauge,out thermo/hygro sensor ,it have connection with telephone cable,
i replace the RJ11 telephone cable connector,because it broken.
| Before i start to replace the RJ11 i was careful the color at cable ,to is the same place just before,here is the colors from a original telephone cable La-crosse | Here i buy one new RJ11 connector ,and with a telephone plug crimping tool i will replace it | Here i cut the cable at straight line | ||
 |
 |
 |
||
| The cable now is at the end cuting ,at straight line | Here i put out the grey external cable | The grey external cable is put out ,and appears four small cables | ||
 |
 |
 |
||
| After i put in the four small cables at new RJ11 connector ,i be careful to is the same place like before ,i put the RJ11 inside to telephone plug crimping tool,and i press strong for the cable to be stable in the RJ11 connector | The cable in the new RJ11 conector is allready | And the test is fine | ||
 |
 |
 |
||
| Here i make a test with a multi modular cable tester.La-Crosse cable is crossover. | Click here for you see video | |||
 |
 |
|||
Replace RJ 45 ethernet cable connector.
Here i will install a RJ 45 Jack over to cat 5 utp cable,i need a plug crimping tool and a small cutter.
| Here it is all material where i need . | Here i put out the external plastic from cat 5 utp cable,with a small cutter. | Here i make a straight line all 8 small cables. | ||
 |
 |
 |
||
| Here i put all small cables at correct position,and cut all in front at straight line. | Here i put all the cables at correct positions in to RJ 45,and all RJ 45 i put in place for RJ 45 position at plug crimping tool,and i press strong,for the cable to be stable in the RJ 45 connector.. | Here it is ready the new cable with RJ 45 connector. | ||
 |
 |
 |
||
| Here it is the design position cable at straight line. | Here it is the design position cable at crossover . | Here it is and two images . | ||
 |
 |
 |
||