Stability base for PCB-Conectors e.t.c.
I make a stability base for PCB conectors e.t.c for to is more easy with soldering iron.I cut with fretsaw a piece of wood
12 x 19 cm,4 clothspin,one metal latch for papers,bolts,thumbscrew.I use 4 clothspin 2 + 2 for large-small dimensions PCB,
and one metal latch for conectors,Jacks e.t.c.Little later i make a better modification for to have motion the PCB vertical
and horizontal.I cut a piece of wood 13,5 cm lenght and 2 x 2 cm dimension ,and with two angle brackets 3 x 3 cm ,and with
screw eye i put it the wood base.After i take a big screw 5 mm and 10,5 mm lenght and from one side i put in at wood with
washer and nut,from other side i take a metal 10 cm lenght and touch it to big screw with thumbscrew. After from metal i touch
over there 2 angle brackets 2 x 2 cm lenght with thumbscrewAnd after over to angle bracket i put over there 2 touch accesory
for to can PCB vertical and horizontal move.
| Here it is the meterial i will use 4 clothspin,one latch for papers,bolts,thumbscrew,a piece wood where i cut it with fretsaw 12 x 19 mm | Here i cut one side clothspin with handsaw,and i cut with fretsaw a white piece wood 12 x 19 cm | Here is the clothspin with thumbscrew and with handsaw i cut little wood from clothspin | ||
 |
 |
 |
||
| Here it is ready 2 clothspin for big dimension PCB and 2 for smaller,and latch for papers for conectors | Here it is ready with 2 PCB,one conector,and one jack RCA,and another one jack | Another one photo from the other side,for do not slide the base i have stick small white sponge | ||
 |
 |
 |
||
| Another one photo | Here some examples with different components | Here some examples with different components | ||
 |
 |
 |
||
| Here some examples with different components | And here i make a better modification for to have motion the PCB vertical and horizontal | I cut a piece of wood 13,5 cm lenght and 2 x 2 cm dimension and with two angle brackets 3 x 3 cm ,and with screw eye i put it the wood base | ||
 |
 |
 |
||
| After i take a big screw 5 mm and 10,5 mm lenght anf form one side i put in at wood with washer and nut,from other side i take a metal 10 cm lenght and touch it to big screw with thumbscrew | After from metal i touch over there 2 angle brackets 2 x 2 cm lenght with thumbscrew | And after over to angle bracket i put over there 2 touch accesory for to can PCB vertical and horizontal move | ||
 |
 |
 |
||
| Click here for you see video. | ||||
 |
||||